3
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-0330-RevC
ECO #: W17-0011
DATE: 4/17/17
For customers using clamp kit 57-6102:
Four clamps total (quantity of two 57-6102) are used on standard beds. Six
clamps total (quantity of three 57-6102) are used on long beds.
1. Take the U-shaped bottom clamp and place it underneath the bed rail so that only the threaded portion is showing (
Figure
5),
next take the top clamp and place it on top of the truck rack bed rail. Align the threaded hole in the bottom clamp with
the hole in the top clamp and attach them both together using the supplied M10 hardware (
Figure 6
). Anti-seize is suggest-
ed for these fasteners as the bottom clamp is aluminum and will prevent the bolts from becoming seized over time. Torque
the fasteners to 25 ft lbs.
2. Repeat this
Step 1
for the rest of the clamps.
Figure 5
Figure 6
12. Locate (1) support tab and loosely secure onto the truck bed rails using (1) M10 x 75mm hex head bolt, (2) M10 flat wash-
ers, (1) M10 nylock nut, (1) long M6 button head bolts, (2) M6 flat washers and (1) M6 nylocks nut. See
Figure
4.
Note:
The support tab can be placed on either side of the r ack legs. Placement will depend on vehicle.
13. Adjust the support tab as necessary then torque all M10 fasteners to 35-40 ft-lbs and M6 fasteners to 5-7 ft-lbs.
See the following steps below for securing the truck rack to your vehicle.
Figure 3
D-Ring
Figure 4
