1
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-0330-RevC
ECO #: W17-0011
DATE: 4/17/17
AUTOMOTIVE PRODUCTS,
ITEM
QUANTITY
DESCRIPTION
TOOLS NEEDED
1,2
2
BED RAIL, DRIVER (1) AND PASSENGER (2)
13MM SOCKET
3
4
RACK LEGS
13MM WRENCH
4,5
2
REAR SECTION, PASSENGER (4) AND DRIVER (5)
10MM WRENCH
6,7
2
FRONT SECTION, PASSENGER (6) AND DRIVER (7)
ALLEN KEY
8,9,10
3
CROSS BUMPER, FRONT (8), MIDDLE (9) AND REAR (10)
RATCHET
11
1
ADJUSTABLE CLAMP ON CROSS BAR
TORQUE WRENCH
12
2
SUPPORT PLATE
13
4
SUPPORT TAB
14
10
M10 HEX HEAD BOLTS
15
8
M10 NYLOCK NUTS
16
26
M10 FLAT WASHERS
17
10
M10 LOCK WASHERS
18
8
M10 x 75MM HEX HEAD BOLTS
19
2
M10 CARRIAGE BOLTS
20
2
M10 WING NUTS
21
2
D RING CLIPS
22
12
LONG M6 BUTTON HEAD BOLTS
23
8
SHORT M6 BUTTON HEAD BOLTS
24
40
M6 FLATWASHERS
25
20
M6 NYLOCK NUTS
ANTI-SEIZE LUBRICANT MUST BE USED ON ALL STAINLESS STEEL FASTENERS TO PREVENT THREAD DAMAGE AND GALLING
INSTALLATION INSTRUCTIONS
HD OVERHEAD TRUCK RACK
APPLICATION:
Universal Short/Long Bed Truck, Ford Super Duty F250/350 Short/Long Bed
PART NUMBER:
57-6005, 57-6015, 57-6025, 57-6035
PROCEDURE
1. Remove contents from box, verify if all parts listed are present and free from damage.
Carefully read and understand all instructions before attempting installation.
Failure to identify damage before installation could lead to a rejection of any claim.
Please see Figure 1 for a breakdown of the parts included in this kit and to aid in assembly.
2. Begin by matching the left front section with the left rear section, loosely secure using (1) support plate, (4) long M6 but-
ton head bolts, (4) short M6 button head bolts, (16) M6 flat washers, and (8) M6 nylock nuts. Repeat this step for the right
side. See
Figure 2.
3. Take the middle cross bar and insert it into the left side of the truck rack. Loosely secure using (1) M10 hex head bolt, (1)
M10 flat washer and (1) M10 lock washer, insert the other end of the middle cross bar into the right side of the truck rack
and loosely secure using (1) M10 hex head bolt, (1) M10 flat washer and (1) M10 lock washer.
