Hand tighten supplied 12mm jam nuts over bracket. Repeat step on opposite side.
Step 6.
Step 7.
Take assembled Grille Guard and place against vehicle, align all brackets with threaded inserts on uprights.
Bolt up loosely using remaining ½” hardware. (Use no flat washers on top brackets).
Adjust Grille Guard so centered and level and torque all hardware to: ½” fasteners to 65 ft. lbs; 12mm nuts to
60 ft. Lbs; tow hook bolts 75 ft.lbs.
Westin Automotive Products, Inc.
5200 N. Irwindale Ave. Suite 220
Irwindale, Ca. 91706
Thank You for choosing Westin products
For additional installation assistance please call
Customer service (800) 793-7846 or (507) 375-3559
75-0224 PAGE 2 OF 2
REVISION A
7/13/99
F i n i s h p r o t e c t i o n - W e s t i n p r o d u c t s h a v e a h i g h q u a l i t y f i n i s h t h a t m u s t b e c a r e d f o r l i k e a n y
o t h e r e x p o s e d f i n i s h o n t h e v e h i c l e . P r o t e c t t h e f i n i s h w i t h a n o n - a b r a s i v e a u t o m o t i v e w a x
( p u r e c a r n a u b a , f o r e x a m p l e ) o n a r e g u l a r b a s i s . T h e u s e o f c l e a n e r w a x o r a n y c o m p o u n d w h i c h
c o n t a i n s a n a b r a s i v e i s d e t r i m e n t a l , a s t h e c o m p o u n d s s c r a t c h t h e f i n i s h a n d o p e n i t t o c o r r o-
s
i
o
n
.
LIGHT MOUNT
BOTTOM TUBE
5/16 NYLON FLAT WASHER
5/16-18 X 1”
SELF-THREADING SCREW
LIGHT MOUNT ATTACHMENT FIGURE
LIGHTED MODELS ONLY
CENTER SECTION OF GRILLE GUARD
FRONT SIDE
FIGURE 1
FOR PROPER ORIENTATION DURING ASSEMBLY,
SPOT WELD ON UPRIGHT BAR SHOULD BE UP
SPOT WELD
DRIVER SIDE INSTALLATION SHOWN - PASSENGER SIDE OPPOSITE
DRIVER SIDE INSTALLATION SHOWN - PASSENGER SIDE OPPOSITE
BOTTOM BRACKET
(WIDE END TOWARD
CENTER OF VEHICLE)
VEHICLE
FRAME
12MM JAM NUTS
TOP BRACKET
1/2-13 X 1.25” HEX BOLT
1/2” FLAT WASHER
1/2” LOCK WASHER
TOW HOOK
