2
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-2851315-RevA
ECO #: W19-0070
DATE: 10/8/2019
PROCEDURE
1. Remove contents from box, verify if all parts listed are present and free from damage.
Carefully read and understand all instructions before attempting installation.
Failure to identify damage before installation could lead to a rejection of any claim.
ITEM 2
ITEM 4
ITEM 6
ITEM 8
ITEM 10
2. Starting at the front mount location, locate (1) Front Mount Bracket and (1) Front Support Bracket. Loosely secure brack-
ets, using: (4) M8 hex head cap screws, (1) M8 extruded u-nut, (4) M8 split lock washers, (3) M8 hex nuts, (5) M8 flat
washers,
See Figure 1. Note:
M8 extruded u-nut is only used if a threaded hole is not present (circled on
Figure 1
).
See
Figure 1.
3. For the rear mounting location, locate (1) Rear Mount Bracket and (1) Rear Support Bracket. Loosely secure brackets, us-
ing: (4) M8 hex head cap screws, (1) M8 extruded u-nut, (4) M8 split lock washers, (3) M8 hex nuts, (5) M8 flat washers.
Note:
M8 extruded u-nut is only used if a threaded hole is not present.
See Figure 2.
