3
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-2774715-RevA
ECO #: W18-0175
DATE: 03/12/19
4. Adjust the Running Board Assemblies (item 1 & 2) along the length of the vehicle.
5. For each Adapter Bracket (item 3), lift the Running Board Assembly and place a Plate B (item 5) between the Adapter
Bracket and the Mount Bracket. See
Figure 2
.
6. Tighten the M8 Set Screws (item 6) until the Adapter Bracket begins to bend.
Note:
Do not overtighten the M8 Set Screws. This may damage the Adapter Brackets. The separation between the Adapter
Bracket and Plate B should be no more than 1/16” of an inch.
7. For each Adapter Bracket/Mount Bracket pair, use (2) M8 or 5/16” Flat Washers (included with mount kit), (2) M8 Hex
Nuts (item 8), and (2) M8 Split Lock Washers (item 7) to secure the Adapter Brackets (item 3) to the Mount Brackets. See
Figure 2
.
8. Tighten all M8 hardware to 15-18 ft-lbs.
PLATE A
Fig. 2
Adjust Running Boards
Place Plate B’s
Tighten Set Screws
Install remaining hardware
ADAPTER
BRACKET
PLATE B
