1
2
STEP BAR (PURCHASED SEPARATELY)
2
4
BRACKET
3
4
BOLT PLATE ASSEMBLY
4
4
3/8-16 X 1.00” HEX HEAD BOLT
5
8
3/8” FLAT WASHER
6
8
3/8” LOCK WASHER
7
4
3/8-16” HEX NUT
8
4
3/8-16 RIV NUT
9
4
M6 BOLT PLATES (INCLUDED WITH STEP TUBES )
10
16
M6 FLAT WASHERS (INCLUDED WITH STEP TUBES )
11
16
M6 LOCK NUTS (INCLUDED WITH STEP TUBES)
QTY
CONTENTS -
CONTENIDO
- CONTENU
TOOLS -
HERRAMIENTA
- OUTILS
9/16” SOCKET
9/16" WRENCH
7/16” SOCKET
7/16" WRENCH
PLIERS
RATCHET
TORQUE WRENCH
ITEM
AUTOMOTIVE PRODUCTS, INC.
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
1
2
ESTRIBOS, (SE COMPRA SEPARADO)
2
4
SOPORTES
3
4
PLACAS DE PERNOS
4
4
PERNOS CON CABEZA HEXAGONAL 3/8-16 X 1,00”
5
8
ARANDELAS PLANAS DE 3/8”
6
8
ARANDELAS DE PRESIÓN DE 3/8”
7
4
TUERCAS HEXAGONALES DE 3/8-16
8
4
9
4
TORNILLO M6 PLACAS (INCLUIDO CON TUBOS STEP)
10
16
M6 ARANDELAS PLANAS (INCLUIDO CON TUBOS DE PASO)
11
16
TUERCA DE INSERCIÓN HEXAGONAL 3/8”
LAS TUERCAS M6 (INCLUIDO CON TUBOS DE PASO)
1
2
MARCHE-PIEDS, (ACHETE SEPAREMENT)
2
4
SUPPORTS
3
4
PLAQUES DE BOULON
4
4
BOULONS A TETE HEXAGONALE 3/8-16 X 1,00 PO
5
8
RONDELLES PLATES 3/8 PO
6
8
RONDELLES A FREIN 3/8 PO
7
4
ÉCROUS HEXAGONAUX 3/8-16
8
4
9
4
BOULON M6 PLAQUES (inclus avec TUBES STEP)
10
16
M6 RONDELLES PLATES (inclus avec TUBES STEP)
11
16
NUTS M6 LOCK (inclus avec TUBES STEP)
ÉCROU À SIX PANS 3/8 PO
DADO DE 9/16”
LLAVE DE TUERCAS 9/16"
DADO DE 7/16”
LLAVE DE TUERCAS 7/16"
ALICATES
MANERAL
LLAVE DE TORQUE
DOUILLE 9/16 PO
CLEF 9/16 PO
DOUILLE 7/16 PO
PINCES
CLIQUET
CLEF DE COUPLE
APPLICATION:
2004-10 DODGE DURANGO
APPLICATION:
2004-10 DODGE DURANGO
APLICACIÓN:
,
DODGE DURANGO MOD. 2004-10
1
2
3
8
MOUNT KIT
EQUIPO DE MONTAJE
TROUSSE DE MONTAGE
22-1405
CHROME/CROMADO/CHROME
22-0020, 22-5020
BLACK/NEGRO/NOIR
22-0025, 22-5025
75-0665 REVISION C 11/5/10
WO:
STEP 1.
Remove contents from box and check for damage. Verify all parts are present. Read instructions com-
pletely before beginning.
STEP 2.
Insert rivnuts as shown.
SEE FIGURE 2.
STEP 3.
Separate trim from rocker panel and insert bolt plates as shown. Leave loose.
SEE FIGURES 1 AND 2.
STEP 4.
Loosely attach brackets as shown.
SEE FIGURE 3.
Tighten top bolt to crimp rivnut until increased resis-
tance is felt. Verify rivnut is not loose in hole, otherwise re-tighten. Hold bolt plate parallel to rocker panel
and tighten bottom nut.
SEE FIGURE 4.
