4
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-1008-RevC
ECO #: W15-0151
DATE: 9/10/15
15. Repeat
Steps 2—14
for passenger Side Step Bar installation.
NOTE:
Pay close attention to specific information regarding
passenger side front Bracket installation in
Step 5
.
16. Do periodic inspections to the installation to make sure all hardware is secure and tight.
DRIVER SIDE INSTALLATION PICTURED
(Fig. 1) Insert coiled end of Fish Wire into the for-
ward oval hole and out through the larger oval hole
Front
(Fig. 2) With Fish Wire as pictured on Figure 1 in
body panel, thread M10 Bolt Plate onto coiled end
(Fig. 3) With the M10 Bolt Plate attached, slowly pull the
Fish Wire back through the forward hole in the body
panel. Once completely exposed as pictured, firmly hold
the Bolt Plate in place, remove the Fish Wire and thread
(1) M10 Plastic Retainer onto the Bolt Plate to hold it in
place (see Fig. 7A).
(Fig. 4B) Model without threaded inserts pictured
(Fig. 4A) M10 Bolt Plate
Front
