WESTFIRE · WF
21
WESTFIRE · WF
21
11
COntrOLs on WestFire uniQ 21
door operation
When opening the door of your Westfire stove always wear the glove that is provided to protect your hand from
possible heat. The handle twists right away from the fire. When shutting the door push the door closed and twist
left until the handle firmly closes.
WOOd FueL
iMPOrtant:
Never use toxic wood such as chipboard, impregnated, painted wood or finished prepared woods
such as pallet.
Good quality wood is the most important factor in your stove working efficiently and cleanly. Always use dry
firewood. The dryness of the firewood plays an important role since the use of wet wood results in poor fuel
economy and may cause a tarry sooty film on the internals of the stove.
Newly cut wood contains 60–70% water, making it totally unsuitable for use as firewood.
Newly cut wood should be stacked and air dried under cover for two years before being used as firewood.
sOLid sMOkeLess FueLs
– Westfire stoves are only CE/EN/HETAS tested and approved for wood. It is possible,
however, to use other types of fuel with due care. When using coal/smokeless fuel you must use a coal insert and
a mix of 80% wood, 20% coal. Please note coal reduces the lifetime of the stove and the chimney considerably.
PetrOLeuM COke is nOt suitaBLe FOr use On tHis stOVe; its use WiLL inVaLidate tHe guarantee
Overnight burning
Westfire stoves are wood stoves, wood burns more efficiently and cleanly if is burnt hotter. Westfire do not recom-
mend that their stoves are burnt overnight for this reason.
As a night time regime we recommend that the fire is loaded when hot and burnt for five minutes with the
secondary air valve fully open until the new wood has taken and is burning, then close the secondary air valve to
its operational position.
On returning to the stove in the morning the fire will have burn out, reload with some paper or firelighter and
some kindling and open all the values fully open and the stove will relight quickly. Beware as the ash bed will
have hot embers.
use of operating tools
Always use the operating tools provided when handling parts likely to be hot when the stove is in use.
Maintenance
UNIQ 21 wood stove needs to have the ash removed from the stove at regular intervals. Make sure the stove is
completely cold before cleaning out ash (embers can remain hot for over 24 hours).
To clean the outside of the stove use a dry cloth.
annual service
The inside of the stove should be serviced /cleaned once a year. To clean the inside, remove all ash, soot and tar
uk
Pre-heated Tertiary air
Handle – Turn away from glass to open
When lighting stove unlatch door 1 cm
to allow extra air into stove
Secondary air lever – push in for fully closed
– pull out for fully open