Westfalia Wetekom 15 94 42, Инструкция по эксплуатации

Страница: 13 / 19

8
Operation
Intended Use
This laminator has been designed for processing hot and cold laminating foil. It is
possible to laminate pictures, maps, documents, papers, etc. up to a total
thickness of 0.4 mm. Any other use is considered unintended use. Unauthorised
modifications or reconstructions are not permitted.
Before first Use
Attach the laminating pouches tray (1).
Insert the two retaining collars of the tray
into the provided holes at the backside of
the unit.
Place the laminator on a level surface.
Hot Laminating
1. Connect the power cable to an easily
accessible, standard electrical socket.
2. Switch the power switch (5) on the
top right-hand side of the unit to the
“HOT” position. The power LED (6)
lights up. The drive motor for the
transport rollers starts up. The correct
operating temperature is reached
after approx. 3-5 minutes. The ready
LED (4) indicator lights up.
3. Insert the document to be laminated
in the pouch so that there is a margin
of approx. 3-5 mm to the edges of the
foil on all sides.
4. Adjust the guide rails (3) to the width
of the laminating pouch.
5. Insert the pouch containing the document in the laminator’s pouch entry (2).
Always make sure to insert the closed side of the pouch first.
6. The foil slowly draws in. The laminating process occurs automatically.
7. After laminating remove the laminated foil from the laminating pouch exit (8).