Westfalia 94 61 29, Инструкция по эксплуатации

Страница: 29 / 39

24
3) Air Ratchet Wrench
Using the Air Ratchet Wrench
1. Insert the desired impact socket (B) onto the ½“ drive (3d) of the air ratchet
wrench or use the supplied extension bar (A) to pick up the impact socket.
2. For tightening and releasing slotted-head screws or cross-head screws insert
the appropriate impact bit (not included) onto a ½“ bits adaptor.
3. Connect the air ratchet wrench to the compressor.
4. Setup the running direction of the air ratchet wrench with the right/left rotation
switch (3e). Turn the switch counter clockwise in the direction of the engraved
“F” symbol (forward), the ratchet wrench will operate clockwise when the
trigger (3c) is pushed. Turn the switch clockwise in the direction of the
engraved “R” symbol (reverse), the ratchet wrench will operate counter
clockwise when the trigger is pushed.
5. First disconnect the air ratchet wrench from the air supply when exchanging
the impact sockets, when not using the unit, after finished working and when
applying maintenance work. Press the trigger in order to remove any
remaining air from the air ratchet wrench.
Notes:
ƒ
During start-up and operation of the air ratchet wrench sudden changes in
motion can occur. Keep firm footing.
ƒ
Tool accessory may briefly continue rotating after the trigger is released.