25
Operating
1. Connect the power plug with a grounded wall
socket and press the ON/OFF switch (4).
The green power indicator light (3) and the red
temperature control light (2) turn on. As long as
the red temperature control light (2) is on, the
water is heated up.
The water amount needs approx. 10 minutes to
heat up sufficiently and transform water to steam.
As soon as the water is completely heated up, the
red control light will turn off.
2. The steam gun is fitted with child-poof lock. First press the
triangular child-proof lock (13) on the left-hand side of the
steam gun into the right. Now you can press the trigger (14).
If a steady flow of steam comes out of the nozzle, the steam
cleaner is ready for use.
To engage the child-proof lock, press the lock to the right.
Before start cleaning we recommend to test the steam
cleaner on a hidden place. If you have to transport the steam
cleaner, use the carrying handle only (5). Only place the
steam cleaner on an even ground and make sure the steam
cleaner cannot tilt.
3. If you wish continuous steam, hold the trigger
pressed. We recommend using the steam
cleaner with short time intervals so in the mean-
time sufficient pressure can be formed. The
temperature control light will turn off and on
during the heating period.
Do not point the steam for long period of time on one spot in order to avoid
damaging the surface to be cleaned. Preferably clean the surface by slowly
passing the nozzle back and forth over the surface. When using the uphol-
stery nozzle with attached cotton cloth, do not let the nozzle to stand on a
place for long time.
