Westfalia 91 30 18, Оригинальное руководство пользователя, Страница: 27 / 34

23
Troubleshooting
Problem Possible Cause Solution
Red and green LEDs
do not illuminate to
indicate the Battery is
charging correctly Battery not correctly
connected to Charger Clean Battery Socket
of Charger and
Battery Contacts and
fully slide on to
Charger so it clicks in
a locked Position
Charger not powered Recheck Mains
Connection
Battery Pack has low
capacity Battery not being fully
charged Do not remove
Battery until a full
Charge is indicated
Battery Pack has
been charged over
100 times and
Capacity has started
to reduce This is normal for
battery packs.
Contact Westfalia
purchase a replace-
ment battery pack
Cordless drill cannot
be switched on
(Trigger Switch (8)
does not move The Forward/Reverse
Switch may be in the
middle (‘locked’)
position Slide the For-
ward/Reverse Switch
either to the left or
right