Westfalia 84 37 02, Инструкция по эксплуатации

Страница: 8 / 28

Safety Notes
4

Make sure the voltage corresponds to the type label on the machine.

Thoroughly read and follow all safety warnings below and on the spindle
sander.

The spindle sander is intended for shaping and finish sanding of interior
and exterior edges of wooden workpieces. Never use the spindle sander
for wet sanding.

Do not use damaged tools (table insert, sanding sleeve, rubber drum,
washers).

Use a dust connection system when possible.

Wear personal protective equipment. Always wear safety goggles
to protect your eyes when using the spindle sander. Take precau-
tions when sanding painted surfaces. Do not sand lead-based
paint. The contaminated dust could cause lead poisoning. When
sanding paint protect your lungs and wear a dust mask or respira-
tor. Do not allow unauthorized peoples to stay close to the working
area.

Do not eat, drink or smoke while painted surfaces are sanded.

Wear suitable clothing when using the spindle sander. Tight clothing will
not get caught in moving parts easily.

Make sure the tools fit precisely onto the spindle. Tools which do not
precisely fit onto the spindle will turn irregularly, vibrate and can cause loss
of control.

Keep the power cable away from rotating parts.

Do not use the spindle sander close to combustible materials.

Before operating the spindle sander, make sure all parts are correctly
assembled.

Check the condition of the spindle sander. If any part is missing, bent, or
does not operate properly, replace the part before using the sander.

Secure the workpiece. Support the workpiece securely on the table, and
hold it with both hands.

Please note the feed direction. Feed the workpiece gradually against the
direction of rotation, onto the sanding sleeve.
Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury: