Westfalia 84 37 02, Инструкция по эксплуатации

Страница: 22 / 28

18
Operation
Fitting the Sanding Sleeve
All sanding sleeves (6) fit over its matching rubber
drum (5).
1. First place the bottom spindle disc (12) over the
spindle (1).
2. Select the appropriate tools in accordance with
the table (table insert, rubber drum, sanding
sleeve and washer).
3. Fit the table insert (10) over the
spindle and onto the bottom spindle
disc (12). Ensure that the table
insert (10) is flush with the table top
(2).
4. Fit the rubber drum (5) over the
spindle (1). Slide the sanding sleeve
(6) over the rubber drum (5). Place
the washer (13) on the spindle (1).
5. Fit the lock nut (14) on the spindle
(1). Tighten the nut just enough to
expand the rubber drum (5) against
the sanding sleeve (6). To not overtighten the lock nut.
Hint: When the sanding sleeve is partly worn on one side, turn it upside
down. By doing this you will maximise the service life of the sleeve by
using the remaining grit.
Switching ON and OFF
The ON and OFF switches (7 and 8) are located on the front of the spindle
sander.
1. To turn on the machine, press the green ON button marked with (
–
).
2. To turn off the machine, press the red OFF button marked with ( O ).