17
Benutzung
Sender
rot
Rückfahr-
leuchte
+12 V DC Rückfahrleuchte
Draht-
Klemme
Masse
Kamera
schwarz
Schaltplan Kamera/Sender/Stromversorgung
Testen des Systems
1. Montieren Sie zuerst (wenn nötig) das negative Kabel wieder
an die Autobatterie. Schalten Sie die Zündung des Kfz ein,
aber starten Sie es nicht.
2. Ziehen Sie die Handbremse an und legen Sie den Rück-
wärtsgang ein.
3. Überprüfen Sie nun das angezeigte Bild am Bildschirm. Wenn
dieses nicht mit dem Bild identisch ist, welches Sie im Rück-
spiegel sehen, drücken Sie die Menü-Taste und wählen Sie
den Menüpunkt DIRECTION (Ausrichtung), um ein seitenrich-
tiges Bild zu erhalten.