Westfalia 83 00 04, Инструкция по эксплуатации, Страница: 25 / 34

21
Operation
Before first Use
Remove all packing parts from the unit and the container and take the
accessories out of the cooking oil container. Dispose of packaging
material not needed or save not accessible for children. There is a risk
of suffocation!
Check the unit for possible transport damages. Clean the unit as
described in chapter "Maintenance, Cleaning and Storing
" before using
for the first time.
Operation
We recommend using quality vegetable oil that is heat resistant and
suitable for frying. If you use firm cooking fat, it is essential to cut it into
small pieces so the fat can melt easier. Put the pieces directly into the
container and not into the frying basket. If the blocs are put into the wire
basket, there will be no heat transmission. Never switch on the fryer
without cooking oil .
1. Fill the fryer at least up to the MIN marking but not higher than up to
the MAX marking that is stamped inside the oil container (9). This is
equal to 1200 ml. Do not exceed the MAX marking; otherwise
boiling oil may cause burns.
2. Plug the power plug into a socket earthed according to regulations.
Switch on the deep fryer by turning the thermostat controller (6)
clockwise. The POWER control light (5) turns on and indicates that
the unit is connected to the power mains.
3. Close the lid while heating up.
4. Select the required temperature with the thermostat controller (6).
The heating control light HEAT (9) indicates, that the heating
element is turned on. The desired temperature is achieved when
the lamp turns off. When the temperature decreases, the thermo-
stat automatically switches on until the set temperature is reached.