Westfalia 82 97 39, Инструкция по эксплуатации

Страница: 12 / 14

11
Adjusting the Machine Support
If the machine support has to be readjusted (e. g. the machine support has
excessive play on the rack), tighten both clamping levers (12) and (14).
Cleaning and Storing
ƒ Preferably clean the drill and mill rig after each use with a hand broom or with
compressed air.
ƒ Protect the drill and mill rig from humidity.
ƒ
Lightly lubricate all moving parts from time to time with common lubrication oil
resp. grease.
Technical Data
Total Height: 50 cm
Weight: approx. 5 kg
Drill Table Size: 215 x 175 mm
Working Stroke (Drill Depth Setting): 50 mm
T-Slots Distance: 100 mm
Radius: 115 mm
For drilling machines with drill chuck
diameter of 43 mm
Additional Accessory:
Horizontal clamping device, Art. 96 90 30
Machine vice, Art. 82 88 22