Westfalia 812592, Инструкция по эксплуатации

Страница: 25 / 29

Operation
24
Standby Mode / Deactivate the Watch
1. In normal time mode press and hold the key A and then
the key B at the same time. After 3 seconds the second
hand runs to the 12 o’clock position. Then release both
keys.
2. Shortly press the key A . All hands run now to the 12
o’clock position and stop there. The LC display is
switched off and reception of the radio time signal is
stopped. The clock continues to run internally.
Exit Standby Mode / Reactivate the Watch
Press any key to exit the standby mode and to reactivate
the watch. The word “
WAIT
” appears on the display. The
watch adjusts the hands automatically to the current time.
This process can take up to several minutes.
Note: If the battery level is too low, the watch may not be
able to maintain the internal running time and the watch
will not be able to be reactivated. In this case the watch
needs to be charged under strong light (for several hours)
until the display shows “
Set to 12
”. Then continue to
process as described in chapter “ Reset the Watch ”.