Westfalia 7163-9001-044, Инструкция по эксплуатации и список запасных частей

Страница: 61 / 143

61
Functions of the Menu Key
-- Temperature
-- Detergent
10.6.3 Calibration
In this submenu you can check duration of dispense of the relevant feed component resp. of
detergent (HE water; Boiler water; Milk; MP; Additive; Detergent). The following example
concerns boiler water but it also fits to all other components:
Press Arrow Down to move to submenu „Calibration“.
Press ENTER twice...
...until the display shows running time.
Same procedure for boiler water, milk, MP, additive and de-
tergent.
10.6.4 Identification
In order to check functioning of the identification you have to select one of the two identi-
fications. The display shows the transmitter number (Responder) that is being identified.
10.6.5 Checking
In menu „Checking“ the second line of the display shows the number of power failures,
data backups on the memory chip, cleaning faults as well as water and milk checks.
In submenu „Power failures“ you can view the number of re-
boots of the automatic feeder after power failure:
In case of memory data error, the computer can fall back upon
an internal backup in submenu „Backup“. Each backup is
counted.
In submenu „Cleaning fault“ you can view faults that occur-
red during automatic cleaning.
In submenu „Check water“ you can view the number of water
checks that have been carried out because the electrode has
not been hit at all or not enough by the water jet.
Submenu „Check milk“ shows the number of milk checks
that have been carried out because the electrode has not been
hit at all or not enough by the milk jet.
Clear fault messages as follows: Press ENTER. Press Arrow Up/Arrow Down and select
„0“. Confirm with ENTER. Then press ENTER again, in order to confirm the input.
➔
calibration
➔
water HE
➔
running time
x:xx sec
➔
power failures
2
➔
back-up
1
➔
cleaning fault
2
➔
check water
0
➔
check milk
0