Westfalia 7163-9001-044, Инструкция по эксплуатации и список запасных частей

Страница: 52 / 143

52
Functions of the Menu Key
10.3 Milk Values
In the main menu „Milk values“ you can carry out all settings concerning fresh milk
feeding. You may choose between the following submenus:
-- Operating mode
-- Milk value
-- Switch to MP--operating mode
-- Switch to 1--circle--operating mode in case milk ratio < 30 %
10.3.1 Selecting the Operating Mode
In submenu „Operating mode“ you can select whether the automatic feeder should run in
the MP--mode or in the MP--/fresh milk mode. Press Arrow Up/Arrow Down to select the
desired operating mode.
In the MP--mode the automatic feeder only distributes milk
water.
In the MP--/fresh milk mode the automatic feeder distributes
milk water and fresh milk.
In case you select the option „MP--mode“, no further submenus are displayed anymore.
In case you select the option „MP--/fresh milk mode“, the display shows the submenus
„Milk Value“ and „Switch to MP--mode“.
10.3.2 Entering the Milk Value
In submenu „Milk Value“ you can enter the solid matter content (SM--content) of the milk.
Depending on the entered concentration and the selected milk value, the automatic feeder
calculates whether and how much milk powder should be added to the milk or whether the
milk should be diluted with water. In case the concentration is above the milk value, milk
powder is added to the milk. In case the concentration is below the milk value, the milk is
diluted with water (the minimum water proportion is approx. 10 %).
When you enter the milk value in main menu „Portion values“, the milk is mixed with
the MP drinking, i.e. MP is added to the milk until the entered concentration is attained.
Example: when you enter a milk value of 120 g/l, a milk
share of 50 % as well as a drinking concentration of 120 g/l,
the automatic feeder dispenses for each portion 0,25 l water
with 30 g MP and 0,25 l milk (= 30 g solid matter).
operating mode
*MP-mode
operating mode
*MP/fresh milk
milk value
120 g/l