Westfalia 64 16 05, Запасные части и инструкция по эксплуатации

Страница: 14 / 19

9
Operation
Turning ON and OFF
1. The power file is turned on with the ON/OFF switch (1). When the switch is
pressed, the power file starts up and runs with the preset speed on the speed
regulator (2).
2. To turn the power file off, release the ON/OFF switch (1). For continuous use,
the switch can be locked in place with the locking button (9). Press the
ON/OFF switch and than press the locking button. Now the ON/OFF switch is
locked and can be released.
3. To release the locking, first press the ON/OFF switch (1). The locking button
lightly jumps out of the housing and the power file turns off after releasing the
ON/OFF switch.
Regulating the Speed
The speed of the power file can be regulated with the speed
regulator (2) in order to match the material which is to be
machined.
1. Turn the regulator to position 1 for low speed (1070
m/min
-1
) and to position 6 form max. speed.
2. During operation it is also possible to infinitely adjust the
speed with the sped regulator.
Dust Collection Bag/Dust Extractor/Vacuum Cleaner
Please Notice!
Grinding some material can lead to the
formation of hazardous or explosive dust. During operation
a dust extractor or a vacuum cleaner should be attached,
or at least the included dust collection bag (4) should be
used.
1. For attaching the suction hose of a dust extractor or
vacuum cleaner, use the included adaptor (6).
2. Attach the adaptor to the extraction flange of the
housing. The adaptor is equipped with bayonet lock. Firmly push the adaptor
with the black rubber ring to the extraction flange and turn clockwise to lock.
3. Connect the adaptor to the vacuum hose or the included durst collection bag
(4). To attach the dust collection bag, squeeze the spring wire rings together
and slide the spring wire rings over the adaptor. To detach the dust collection
bag, press the spring wire rings together and remove the dust bag.