Westfalia 64 16 05, Запасные части и инструкция по эксплуатации

Страница: 13 / 19

8
Operation
Before first Use
Remove the angle grinder and the accessories for the packaging. Keep
packaging material out of reach of children. There is risk of suffocation!
Assembling
The power file is delivered partly assembled to ensure
transport. The power file is equipped with 2 interchange-
able grinding arms of 8 and 13 mm width.
For assembling the power file, proceed as follows:
1. Insert the regulating turn knob (7) from the right side
into the sanding arm holder (10) and the black spring
from the left side into the provided notch.
2. Attach the sanding arm (3) to the holder and tighten
with the regulating turn knob. In the sanding arm you
will find the suitable thread for the turn knob.
3. Lightly press the sanding arm holder and the sanding
harm together in order to tighten the regulating turn
knob.
Installing/Replacing the Sanding Belt
Disconnect the unit from the power mains.
1. Slacken the sanding arm by folding the
tensioning lever (8) forward.
2. Insert the sanding belt (11) into the housing.
Guide the sanding belt behind the cover (5).
Please follow the rotating direction arrow on the
sanding belt and the cover. The direction arrows
have to face in the same direction.
3. Tension the sanding belt with the
tensioning lever (8) by turning back.
Start up the power file at the lowest
speed – speed regulator (2) must be
set to position 1 – and adjust the
position of the sanding belt by turning
the regulating turn knob (7). Adjust the sanding belt in such a way that the
belt does not walk off the front pulley to one side.