V
Do not pull the belt over rough and sharp edges.
Do not disassemble the belt and do not try to repair it yourself. The ratchet tie
down set does not contain parts serviceable by you. If any problems occur,
contact our customer service.
The belts confirm to EN12195-2.
Using
1. Push the black plastic sliding switch on the drum and pull out as much strap as
needed from the drum.
2. Sling the belt tightly around the item you intend to tie down. The hooks at the
end of the straps can be hooked into the loops sewn into the opposite strap.
The hooks and loops are designed to give you a wide variety of other
opportunities of securing items.
3. Slightly tighten the strap and the use the ratchet to solidly tighten it.
4. To loosen the strap, pull the small handle inside the ratchet and flip open the
ratchet 180° to release the spool. Pull the strap from the spool and allow it to
retract into the drum and secure it with the black plastic sliding switch.
Technical Data
Lashing Capacity LC .................................................................. 180 daN
Length of the Strap .................................................................... 2.70 m
Length over all ........................................................................... 3.20 m
Tape Size ................................................................................... 25 mm
Extension ................................................................................... max. 9 %
Material ...................................................................................... PES (Polyester)
Safety Notes
