Westfalia 376962, Инструкция по эксплуатации

Страница: 23 / 33

20
1) Air Paint Spray Gun
Paint Jet Adjustment
ƒ For a wide jet (horizontally), align the nozzle (1a) vertically.
ƒ
For a high jet (vertically), align the nozzle (1a) horizontally. Use this setting
for spraying larger areas.
ƒ
Use flat-nose pliers to adjust the nozzle if necessary.
Using
1. Before starting to work, check the trigger (1c) to make sure it moves freely.
2. Connect the paint spray gun to the compressed air supply. The air should
be regulated and filtered. Setup the air pressure according to the
parameters supplied with the paint to be processed.
3. Note the parameters given by the manufacturer of the coating materials to
be used. Pour the material to be processed in the paint container (1d) and
carefully close the container with the lid. Pay attention to the air hose when
painting. Hold the hose firmly with one hand while operating the paint spray
gun with the other hand. The hose must not be bent. Do not step on it, as
this will lead to formation of droplets.
4. Press the trigger (1c) and perform test runs on some test pieces. This way
you can determine the optimum amount of paint and the different paint jet
adjustments.
ƒ
The movement speed of the spray gun depends on the setting of the paint
flow regulator (1b). With little paint, move the spray gun slowly. With plenty
of paint move it faster. Do not spray in an arc on the surface and do not
interrupt spraying as this will lead to uneven or too little paint distribution
onto the surface. The general recommended spraying distance is about
15 – 20 cm.
ƒ If the finish is too dry, use the flow regulator (1e) to reduce the air supply.
Turn the air regulator steplessly clockwise to reduce the max. possible air
pressure.
ƒ If the finish is too wet, reduce the amount of paint with the paint flow
regulator (1b).
ƒ If the atomisation is too coarse, increase the intake air pressure with the
flow regulator (1e). If the atomisation is too fine, reduce the intake air
pressure.
ƒ Always keep the spray gun in a constant distance to the surface to be
sprayed.
ƒ Always keep the hole on the lid of the paint container open to avoid
malfunctions.