17
Using
7. Start spraying openings and corners of the object. If necessary, take a short
break after each spraying process, so the paint may evaporate. Each lane
should overlap to at least 50%. Always keep the spray gun in a constant
distance to the surface to be sprayed. Hold the spray gun vertically to the
surface to be sprayed and move the spray gun evenly and in parallel lanes
from one side to the other or from top to bottom. Move the spray gun over the
edges of the object so that the edges get enough paint.
8. If you do not use the paint spray gun for a short time, turn off the air supply
and release the pressure.
9. Check the paintwork on all sides, before cleaning the spray gun. After work
empty the paint container into an appropriate bin. Properly dispose of coating
material that is no longer needed.
Recently treated surfaces must not be exposed to direct sunlight, to very high
or low temperatures, wind, dust, water or rain.
Cleaning
When using water-soluble coating material, simply clean all parts of the air paint
spray gun thoroughly with water.
Intensive Cleaning
Please note that disassembling and intensive cleaning of the paint spray gun
are inevitable, as otherwise it can lead to debris and to a bad spray result, if
lacquer and priming coats are used as coating material.
Right
Wrong
Wrong
Right