11
Using
Maintenance, Lubrication and Care
To ensure proper functionality and a long lifetime, diligent
maintenance is essential.
For operating pneumatic tools, clean air is required. Corrosion
residues, dust and dirt from the pneumatic pipes reduce the effi-
ciency of the tool and will cause technical problems. An upstream
maintenance unit consisting of filter and pressure regulator valve
removes moisture and dirt from the air and controls the working
pressure.
After use, clean the air dent puller with a moist cloth. Keep the
guidance of the slide hammer clean at all times.
Do not use abrasive or aggressive chemicals as benzene or
thinner, which may dissolve plastic parts.
Do not allow liquids to enter the unit and never immerse it into
liquids. Water in the compressed air inlet can damage the ma-
chine. Therefore it is recommended to drain the air lines and the
compressor in regular intervals! Also clean the air filters in regular
intervals.
The air dent puller requires clean and oil-free air. Therefore do
not use an oil-fog lubricator within the air supply system.
If possible, only use compressed air hoses for the air supply that
previously have not been used with other air tools which required
an oil-fog lubrication system.
Storing
Store the air dent puller in a dry location that is protected from
dust and dirt.
Store the air tool out of reach of children.
Содержание 10 92 98
Страница 1: ...Westfalia Bedienungsanleitung Nr 109574...