FICHIER : BUREAU\NOTICEDEMONTAGE\SIARR\NDM5000\NDM5408-B - FOLIO NDMANG
ASSEMBLY INSTRUCTIONS
PREPARATION
* Remove the 2 bolts under the bumper to facilitate fitting.
ASSEMBLY
* Fasten the right-hand arm B on the right-hand side-member
at points V and X with bolting kits V and X.
* Fasten the left-hand arm C on the left-hand side-member
at points V and X with bolting kits V and X.
* Fasten the coupling cross-member A to the right-hand and left-hand
arms at points W and Y with bolting kits W and Y (If necessary
insert the back plates between the arm B and cross-member A).
* Fit the head D on cross-member A at point Z with bolting kit Z.
* Fasten the ball joint on the head D at point U with bolting kit U.
FINISHING
* Tighten all of the nuts, bolts and screws to the torques indicated below.
* Refit the 2 bumper bolting bolts.
FASTENING KIT
4 HM10x25 screws
4 CS10 washers
2 HM10x35 screws
4 10-27 plain washers
2 CS10 washers
4 M10 cage nuts
2 10-27 plain washers
2 HM10 nuts
2 HM10x25 screws
2 CS10 washers
Type
Type
Max. Total
Max. Total
Max. Verti-
Value
2 HM10x25 screws
2 10-27 plain washers
SI053
Approval No.
Authori. Weight Towable Weight
cal load
D
2 CS10 washers
Tow bar for
2 10-27 plain washers
2 HM12x60 screws
Peugeot 207 SW
e24*94/20*00*0084
1 758 kg
1 150 kg
46 kg
6,42 kN
2 CS12 washers
(Long Detachable Ball Join)
2 HM12 nuts
NB :
Electrical diagram inside our universal or custom wiring kits.
TORQUES :
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
M16
AC8.8
19,5daNm
M12
AC10.9 11,4daNm
M8
AC8.8
2,3daNm
If this tow bar is fitted in accordance with our recommendations it will give a complete-
M16
AC10.9
27,5daNm
M10
AC8.8
4,7daNm
M8
AC10.9
3,3daNm
ly satisfaction. We cannot accept any responsability in the event of changes to or
M12
AC8.8
8,1daNm
M10
AC10.9
6,7daNm
improper use of this item.
W
X
Z
Y
Fig. 1
V
SIARR
5408
315118600001
!
Affix the sticker in the position
