Document: 1904en01.doc
QWTIME III IMPULSE AMPLIFIER
Author: PM
Date: 2011-02-03
User Manual
Page: 9 o f 28
WESTERSTRAND URFABRIK AB
P.O. Box 133
Tel. +46 506 48000
Internet:: http://www.westerstrand.se
SE-545 23 TÖREBODA
Fax. +46 506 48051
E-mail:
Start up
When the Impulse Amplifier is connected for the first time correct/requested
language has to be entered. Press
NO
until requested
language occurs in the display e.g. English. Accept with YES.
Press
NO
until correct country code occurs.
For Finland, select FIN. Accept with YES.
Set, by using the arrows, the right time format i.e. year, month, day and hour
but a few minutes in advance.
Wait for the right time and synchronise using
YES
.
Now the question: SLAVE CLOCK 12.00?
If the Slave Clocks show 12.00, answer
YES
, if not set the time shown by
the slave clocks. Accept using
YES
.
Accept using
YES
.
The Impulse Amplifier is now in running mode.
NOTE!
If a slave clock runs out by a minute, its cabling must be pole changed and
the slave clock to be corrected manually.
NOTE!
If the time of the slave clocks is ahead of correct/present time the Impulse Amplifier
Programmer will wait until correct time corresponds with the slave clocks.
STARTING
SET TIME
110314 09:07
MON 14 MAR 2011
09:07:00 LTw
LANGUAGE
ENGLISH?
COUNTRY
FIN ?
SLAVE CLOCK
=
12:00
OFF
SLAVE CLOCK
= 12:00
ON?
