Document: 4116en05.doc
Bruksanvisning Sportstimer LED
Author: CF
Date: 2012-08-27
Westerstrand Sport System
Page: 5 of 12
Introduction
This manual contains instructions for installation and use of the Westerstrand Sportstimer. The
Sportstimer can be used as a real time clock or as a chronometer counting up or down. Lap times
can be stored and there is a function to count down to repeated starts. There are two remote
controls, one radio remote and one wirebound. It is also possible to connect other controls, such
as a starting gun.
Installation
The Sportstimer is powered by either 230VAC or 12VDC. At delivery two cables are provided; one
for mains connection and one with clamps for connection to a car battery. The Sportstimer can be
connected to both power sources at the same time without risk of damage. When the battery input
is used a gauge shows the approximate state of charge of the battery. When the voltage level
drops below a certain point the power is cut. This is done to protect the battery from over-
discharge.
Electrical connection
Picture 1. Connection panel. (Connector appearance may differ).
From top to bottom, the following is shown:
1. Connection of data cable
2. Connection of the wired remote control
3. Battery indicator
4. Connection to 12V DC (Battery)
5. Connection to 230V AC (Mains)
Remove the lids and connect the cables. The remote control can also be
connected when the product is running.
