Western WB-160D, Руководство пользователя и инструкции по установке

Страница: 8 / 12

Lit. No. 43575/43585/43595, Rev. 01 8 November 1, 2017
LOADING YOUR SPREADER
Material Weights
Material
Density
(lb/ft
3
)
Rock Salt 80–90
LOADING
SPREADING TIPS
• Use care when operating spreader near
pedestrians.
• Spread ice melting materials "with the storm" to
prevent unmanageable levels of ice from building.
• Adjust material fl ow by following the instructions in
the "Operation" section of this document.
WARNING
Never remove spreader from vehicle with
material in it as this could cause damage to
the frame assembly.
WARNING
Do not overload spreader. Use chart below
to calculate weight of material. Weights of
material are an average for dry materials.
CAUTION
DO NOT leave unused material in
hopper. Material can freeze or solidify,
causing unit to not work properly.
Empty and clean after each use.
CAUTION
Read and adhere to manufacturer's
ice-control material package
labeling, including Material Safety
Data Sheet requirements.