Lit. No. 43577/43587/43597, Rev. 00
8
July 15, 2013
LOADING YOUR SPREADER
Material Weights
Material
Density
(lb/ft
3
)
Rock Salt
80–90
LOADING
SPREADING TIPS
• Use care when operating spreader near
pedestrians.
• Spread ice melting materials "with the storm" to
prevent unmanageable levels of ice from building.
• For a wider pass, increase pace.
• For a heavier pass, decrease pace.
ACCESSORIES
The following accessory is available from your
distributor.
Poly De
fl
ector Kit
Provides a tighter spread pattern for areas such as
sidewalks and walkways.
WARNING
Never remove spreader from vehicle with
material in it as this could cause damage to
the frame assembly.
WARNING
Do not overload spreader. Use chart below
to calculate weight of material. Weights of
material are an average for dry materials.
CAUTION
DO NOT leave unused material in
hopper. Material can freeze or solidify,
causing unit to not work properly.
Empty and clean after each use.
CAUTION
Read and adhere to manufacturer's
ice-control material package
labeling including Material Safety
Data Sheet requirements.
