Western PRO-FLO 2, Руководство пользователя

Страница: 9 / 28

Lit. No. 94417/94418, Rev. 08 7 August 10, 2005
6. Position the tabs of the hopper assembly over the
top of the mount assembly, and lower.
7. Allow the hopper assembly to lower into position.
8. Insert hold-down pins and secure with hairpin cotter
pins.
MOUNTING THE SPREADER
9. Connect the spreader wiring harness to the vehicle
wiring harness.
10. Verify vehicle stoplights and spreader center high
mounted stoplight are working properly.
NOTE: Grease all electrical connections with
dielectric grease.
Spreader Wiring Harness
Vehicle Wiring Harness
Hairpin Cotter
Pin
Hold-down
Pin
CAUTION
Both hold-down pins must be in place and
secured with hairpin cotter pins. The hopper
assembly may become unstable if the pins are
not properly secure while the vehicle is in
motion. Never use a finger to check alignment.
Tab