Western PRO-FLO 2, Руководство пользователя

Страница: 7 / 28

Lit. No. 94417/94418, Rev. 08 5 August 10, 2005
371 lb.
950 lb.
Sand = 95 lb./ft.³ Salt = 40 lb./ft.³
400 lb.
156 lb.
10 ft.³
3.9 ft.³
10 ft.³
3.9 ft.³
Salt = 40 lb./ft.³ (avg.)
Very Course = 35 lb./ft.³
Coarse = 45 lb./ft.³
Fine = 50 lb./ft.³
LOADING
This manual covers vehicles which have been
recommended for carrying the spreader. Please see
your local dealer for proper vehicle applications.
Certification
Approximate Salt Weight Approximate Sand Weight
Load Weights
Plus Approximate Base Unit Weight of 355 Lbs. Including Mount
NOTE: If spreader and ice control material loading
is in doubt, weigh vehicle for compliance with
vehicle ratings.
WARNING
Overloading could result in an accident or
damage. Do not exceed GVWR or GAWR
ratings as found on the driver-side vehicle door
cornerpost.
WARNING
The use of under-frame or in-bed mounts on
half-ton trucks is restricted to spreading only
salt or calcium chloride. (max. 50 lb. per cu. ft.)
Failure to comply could result in exceeding the
payload capacity.
WARNING
New untitled vehicle installation of a spreader
requires National Highway Traffic Safety
Administration altered vehicle certification
labeling. Installer to verify that struck load of
snow or ice control material does not exceed
GVWR or GAWR rating label and complies with
FMVSS.
CAUTION
Read and adhere to manufacturer’s ice control
package labeling including Material Safety
Data Sheet requirements.