Western IMPACT UTV Straight Blade Snowplow, Руководство пользователя

Страница: 18 / 20

Lit. No. 87009, Rev. 00 18 May 15, 2021
DETACHING THE SNOWPLOW
1. With blade straight, lower snowplow to the ground.
Let out approximately 2" more cable after blade
contacts the ground.
2. Remove jack stand wire-lock clevis pin. Fully lower
jack stand. Insert pin in jack stand hole that aligns
with hole in angle frame. Engage the wire lock.
3. On driver's side, pull up slightly on headgear
to relieve pressure on connecting pin while
removing the pin. Rotate pin and insert into hole in
headgear.
4. Repeat on passenger's side.
5. Remove cable restraining wire-lock clevis pin.
Remove winch cable/rope from lift pin and pulley.
Reinsert clevis pin and wire lock. Retract cable
fully onto winch.
6. Back vehicle away to disconnect headgear from
receivers.
Jack Stand
Wire-Lock
Clevis Pin
Connecting
Pin
Jack
Stand
DETACHING SNOWPLOW FROM VEHICLE
WARNING
Keep 8' clear of the blade when it is being
raised or lowered. Do not stand between
vehicle and blade or directly in front of the
blade. If the blade hits or drops on you, you
could be seriously injured.
WARNING
Inspect snowplow components and bolts
for wear or damage whenever attaching or
detaching the snowplow. Worn or damaged
components could allow the snowplow to
drop unexpectedly.
Connecting Pin
Wire-Lock
Clevis Pin
Jack
Stand
Hole in Headgear
Headgear
Connecting
Pin Hole