manualshive.com logo in svg

Western IMPACT UTV Straight Blade Snowplow, Руководство пользователя

Поделиться
Скачать
Western IMPACT UTV Straight Blade Snowplow Скачать руководство пользователя страница 13

Lit. No. 87009, Rev. 00 

13 

May 15, 2021

HAND-HELD CONTROL

Function Description of Operation

RAISE

Press the cable retract switch on the winch 
control until blade is at the desired height or 
against the headgear stops. 

NOTE: Continuing to press the cable retract 
button on the winch control after the blade 
is fully raised could damage the winch, 
winch cable, plow headgear, and/or drain 
the vehicle battery. 

LOWER

Press the cable extend switch on the winch 
control until blade contacts the ground then 
extend out an additional 3" to 4" of cable to 
allow for blade 

fl

 oat while plowing.

ANGLE

Pull UP on the angle lock pin to release 
the blade. Rotate the angle lock pin handle 
counter clockwise to latch it in the unlocked 
(UP) position using the detent incorporated 
into the angle pin holder on the sway frame. 

Move to the side of the blade. Position the blade 
in the approximate desired angled position by 
pushing or pulling the end of the blade toward 
or away from the vehicle. Rotate the angle 
lock pin clockwise slightly to unlatch it from the 
detent. The angle lock pin is now spring-biased 
downward to lock the blade angle once it aligns 
with one of the 

fi

 ve angle position holes. 

If the pin does not fully engage the drive link, 
adjust the blade angle position slightly until the 
pin drops into the closest angle position holes. 
Ensure that the angle lock pin is completely 
engaged into the drive link and protruding slightly 
through the underside of the link before plowing.  

 WARNING

To prevent accidental movement of the blade, 
always unplug the control whenever the 
snowplow is not in use.

BLADE POSITIONS: STRAIGHT BLADE 
SNOWPLOW

The UTV straight blade snowplow can be used in 
these plowing positions.

Straight Blade

Use straight blade for wide-path plowing or
stacking snow.

Angled Blade

Move the blade in either direction for general plowing 
and widening.

OPERATING YOUR SNOWPLOW

Ensure that angle lock pin 
protrudes slightly through 
underside of link.

Содержание IMPACT UTV Straight Blade Snowplow





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды