Lit. No. 94430/94431, Rev. 09
10
October 1, 2018
MOUNTING THE SPREADER
RECEIVER MOUNT SPREADER
NOTE: The spreader shall be installed according
to instructions supplied. Your local outlet is
trained to provide this service and service your
spreader with factory original parts.
CAUTION
During removal or mounting, securely grip
spreader to avoid dropping.
1. Attach the spreader to the receiver mount with six
3/8" x 1" cap screws.
2. Insert the assembled unit into the receiver hitch
and secure with pin (not included).
3. Plug the spreader harness into the vehicle
harness.
4. Use the supplied ratchet straps to secure the
assembly to the vehicle frame.
Attaching the straps to the vehicle bumper or
tailgate may result in vehicle or spreader damage.
