Western Digital Ultrastar DC ME200, Руководство по эксплуатации продукта

Страница: 16 / 45

Ultrastar Memory Drive Boot, Settings and Diagnostics Menu
- 16 -
3.2 Guest OS
Once the guest operating system loads, it is possible to see all available system
memory using standard
free command:
Figure 3-5. Performance Data Collection
Additionally, to check the Ultrastar memory drive version and configuration, users
may see the
wmemversion command (Note: this requires installation of Ultrastar
memory tools; see Chapter 2 -
Installing Ultrastar Memory Drive Tools
):
Figure 3-6. Software Installer
Supported until: Unlimited this specific example shows the resources available for
use:

1 x 2 Processor System (“Board”) with 768GB RAM
(of which 728GB are available for use)

2 x NVMe SSDs (“Boards”) with 1,788GiB each
(of which 1,044GiB each are available for use).
The system reports total 2,816GB available for use.
NVMe® SMART attributes are accessible in-band using the command below. SMART
attributes are also accessible out-of-band using IPMI.
# free -g
total used free shared buff/cache available
Mem: 2771 21 2749 0 0 2746
# wmemversion --long
WDC Ultrastar DC ME200 memory: 8.6.2535.77 (Sep 20 2018 20:26:30)
System configuration:
Boards: 3
1 x Proc. + I/O + memory
2 x NVM devices (HGST HUSMR7616BDP3M1)
Processors: 2, Cores: 36, Threads: 72
Intel(R) Xeon(R) Gold 6140 CPU @ 2.30GHz Stepping 04
Memory (GB): 2816 (of 4343), Cache: 730, Private: 797
1 x 728GB [ 768/ 1/ 39]
1 x 1044GB [1788/365/379] 86:00.0#1
1 x 1044GB [1788/365/379] 87:00.0#1
Boot device: [HDD0] ATA VK000240GWCFD