Western Co WRD, Руководство пользователя

Страница: 20 / 33

WRD
Manuale utente
EN
19
Configurazione con WRD + WBM + WRM30
(1..8)
Configuration with WRD + WBM + WRMxx
(1..8)
MENU 8.3
WI.SETUP:
not present
List displayed: Settable value and descriptions: Value:
Device not present.
MENU 8.2
Set the battery charge voltage:
Pb Flood 14.80@25°C / 29.60@25°C / 59.20@25°C :
Setting to operate with Pb Flood type
battery.
1
Pb Seal/Gel 14.40@25°C/ 28.80@25°C / 57.60@25°C :
Setting to operate with Pb Seal or Gel type
battery.
1
LiFePO4 < 14.00..14.70V >
< 28.00..29.40V >
< 56.00..58.80V > fixed :
Setting to operate with Lithium type battery
with integrated BMS.
1
WRM30 n. 1 SETUP:
|
|
VEoCharge: 14.40V
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VLowBatte: 12.56V
|
|
|
|
VEndLBatt: auto
|
|
|
|
|
|
Prog.Load: 16hour
|
|
|
|
|
|
VnightThd: 2.00V
|
|
|
MPPT algo: auto
|
|
|
HrToFloat: 1hour
|
|
UPDATE FW: ---
< 12.00..12.56V > / < 24.00..25.12V > / < 48.00..50.24V > :
below this threshold, the WRM30 goes into
Low Battery status and deactivates the LOAD.
1
24h/24h : LOAD always active.
1
< 1..16h > : LOAD active from sunset for the set hours. 1
Only Night : LOAD active only during the night. 1
Only Day : LOAD active only during the day. 1
OnSurPlus : LOAD active only during an energy surplus.
1
< 1..8h > : time in Absorption phase before moving to
Float phase.
1
List displayed: Settable value and descriptions: Value:
RUN : *CAUTION* starts the procedure to update the
firmware in the WBM device. The firmware update
file must be present in the uSD card.
1
< 1..8 > select the WRM30 to edit. 1
auto (VEoC-0.2/0.4/0.8V);
< 12.72..13.68V > / < 25.44..27.36V > / < 50.88..54.72V > :
above this threshold, the WRM30 goes out
Low Battery status and reactivates the LOAD.
1
2.00V ; 3.28V ; 4.56V ; 5.84V : below this threshold, the
WRM30 detects the sunset.
1
auto ; parall. ; indep. : mode in which the MPPT
algorithm considers the two channels.
1