Western Co Globe Entry, Руководство пользователя

Страница: 26 / 32

GLOBE ENTRY
User manual
EN
10
STEP 9
–
Test and closing procedure
Proceed during the day with test following these steps:
1) With the PV module exposed to the sun, verify that the GLOBE-TRONIC recharges the battery keeping an eye on
the Green LED that indicates the intensity of the battery recharge current (IBATT) (see paragraph Displays and
protections) and tat the streetlamp is turned off.
2) Simulate the night disconnecting one of the wire of the PV module.
3) Verify the correctness of the turning on of the load and of the Yellow LED on the GLOBE-TRONIC (see paragraph
Displays and protections).
4) Test the functionality of the button for the settings LED luminaire. If the button is in ON position, verify that all
the LEDs inside the luminaire holder are turned on. If in OFF position, verify the lighting up of the half of the LEDs.
5) Reconnect the pole of the PV module that was disconnected and wait for the switch off of the streetlight.
6) Verify the status of Red LED of the GLOBE-
TRONIC (see paragraph Displays and protections). If there aren’t
technical faults and if the battery isn’t discharged, the Red LED should remain off.
7) In case of malfunction we recommend to contact Western CO. Service dept. if everything is OK, close the cover
so to complete installation.
SCREWS AND BOLTS TABLE
Q.ty Description
2 SCREW TBEI ISO 7380 M8X10 INOX A2
2 WASHER UNI 6592 M8 INOX A2