10
Appendix to installation manual 6178-2203
Commands only in the TD-32.
TD-32 B have similar commands with the same functionality.
Command in TD-32:
\F
Relevant command in TD-32 B:
&V0
Description:
Display telephone directory entries saved by AT&Zn.
This command didn’t work in the TD-32. Instead of
this command one can use the AT&V0 to see the
saved telephone numbers.
Command in TD-32:
Nn
(n=0,1)
Relevant command in TD-32 B:
AT+MS
Description:
The ATNn command in the TD-32 enables/disables
automode detection. The same functionality can be
found in the second parameter of the AT+MS
command in the TD-32 B. See also the ATNn
command in the next section.
Command in TD-32:
\S
Relevant command in TD-32 B:
&V0
Description:
The \S command in the TD-32 displays current
modem settings in a user friendly interface.
The current settings can be viewed with the
command AT&V0. This command is not as user
friendly as the AT\S but still all information needed
can be found.
Command in TD-32:
AT*NCK
Relevant command in TD-32 B:
AT+GCI
Description:
Change country code. This is not an official command
described in the manual. It has no relevance since only
country code supported in TD32 B is FD (EU-TBR).
Содержание TD-32 B
Страница 26: ...26 OWN COMMENTS...
Страница 27: ......
