49
6193-5201
Client Configuration
Perform the same configuration steps as the Access Point configuration with the follow-
ing differences:
Enter “Network”, and select Operating Mode as Client.
Device Mode should be set to Bridge.
Set the Gateway IP address to 192.168.102.54
Set the Ethernet IP address to 192.168.102.53, network mask 255.255.255.0
Set the Wireless IP address to 169.254.102.53, network mask 255.255.255.0
Click on button Save to Flash and Reset. Webpage will display that message indicating
details are being written to flash. Wait for RM-240 to reboot before removing power.
Extending range of a network with a Repeater hop
Configure units as described in Section
Extending a wired network
. Place the Access Point
at the remote intermediate repeater location. Additional repeaters can be added using
Wireless Distribution System (WDS) – refer section 3.10 Repeater Configuration for
further details.
6XXZhh
Ed^ci
A6C
8a^Zci&
8a^Zci'
&.'#&+-#%#%
'**#'**#'**#%