V3.8
OnTime Industrial Ethernet
U/R/T200 series Installation Guide
- 6 -
2 Quick Install Guide
2.1.1 Release Notes – Software versions
Information on release notes, software versions, IP Configuration tool and MIB’s can be found
on the CD or
www.OnTimenet.com/upgrades.htm
Access to this page requires a user name and a password. This can be obtained by
contacting us on tel47 22 09 03 03, Fax +47 22 09 03 10 or
. User name will be given in exchange for information of Customer
name, Switch type/serial number or Order number for the delivery of switches.
2.1.2 Mounting, power and port connections
A quick guide for how to install a U/R/T/200 using DIN rail mounting (default) is as follows:
1. Mounting, see chapter 3.1.1
2. Power connection, see chapter 3.1.5
3. Port connections, see chapter 3.1.6 and 3.1.7
Now the switch is ready for use.
2.1.3 Redundant ring – FRNT0 configuration
Setting up several R/T200 switches in a redundant ring using the FRNT0 protocol requires
switch management configuration via the IP configuration tool. The program is available for
download from OnTime web page
:
http://www.OnTimenet.com/upgrade.htm
.
Extract the .ZIP file to your computer, and start the application from a PC on the network that
you want to configure. Make sure that the IP Address of the configuration software (see figure
below) is in the same sub domain as your PC.
