• Do not drop, knock or shake the product. Rough handling above the specification may
cause damage to internal circuit boards.
• Use a dry or slightly water-damp cloth to clean the product. Do not use harsh
chemicals, cleaning solvents or strong detergents.
• Do not paint the product. Paint can clog the product and prevent proper operation.
If the product is used in a manner not according to specification, the protection provided
by the equipment may be impaired.
If the product is not working properly, contact the place of purchase, the nearest
Westermo distributor office or Westermo technical support.
NOTE
Devices not used shall be kept in the factory sealed moisture barrier bag.
Open, unsealed devices should not be kept unpowered for more than 30
days.
2.4. Product Disposal
This symbol means that the product shall not be treated as unsorted municipal waste when
disposing of it. It needs to be handed over to an applicable collection point for recycling
electrical and electronic equipment.
By ensuring the product is disposed of correctly, you will help to reduce hazardous
substances and prevent potential negative consequences to both the environment and
human health, which could be caused by inappropriate disposal.
Figure 1. WEEE symbol for treatment of product disposal
2.5. Compliance Information
REGULATORY NOTICE
Any changes or modifications shall be approved by the party responsible
for compliance. If not, users could void the user's authority to operate the
equipment. Country code and antenna gain need to be set properly for
correct functionality in the installed country.
Ibex-RT-610 Series
7
