20
6623-2232
Cooling
This product uses convection cooling.
To avoid obstructing the airflow
around the product, use the following
spacing rules. Minimum spacing 25 mm
(1.0 inch) above / below and 10 mm
(0.4 inches) left / right the product.
Spacing is recommended for the use of
product in full operating temperature
range and service life.
10mm
10mm
Mounting
This unit should be mounted on 35 mm DIN-rail, which is horizontally mounted inside an
apparatus cabinet or similar. Snap on mounting, see figure.
Mounting the BRD-355 with integrated DIN-clip:
