14
6623-2232
LED Indicators
LED
Status
Description
STS
Status
RED
Indicates a fault, except during boot-up
RED FLASH
Indicates a fault, except during boot-up
GREEN
All OK
GREEN & ONE RED FLASH All OK but no VPN peer connected
xDSL
Link status
OFF
No ADSL connection
GREEN FLASH
Negotiating with the provider DSLAM
GREEN
All OK, ADSL link established
STS LED – Status indicator
The status indicator reports the health of the unit. In normal operation the indicator will
be green, however, if a fault is detected, either at boot-up or during normal operation,
the indicator will light red. When the unit is first switched on or is reset, the indicator
will first light red then flash red. This is normal behavior during boot-up and does not
indicate a fault.
Configuring a VPN connection in the BRD-355 and activating the service will cause the
STS LED to be lit GREEN but FLASH RED every third (3) second to indicate that no
peer is connected on the VPN. The feature of the VPN status in the STS LED makes it
easy for staff to see whether or not the VPN connection is working without having to
login to the device.
DSL LED – xDSL link status
The DSL LED reports the status of the connection to the network. When powered
up the indicator will be off, the indicator will then flash green whilst the unit tries to
negotiate the link with the provider DSLAM, once successfully connected to the provider
the indicator will light green to indicate that everything is ready and functioning on the
xDSL link level.
