2.5. Compliance Information
2.5.1. Agency Approvals and Standards Compliance
Type
Approval/Compliance
EMC
• EN 50121-4/IEC 62236-4, Railway signalling and telecommunications apparatus
• EN/IEC 61000-6-2, Immunity industrial environments
• EN/IEC 61000-6-4, Emission industrial environments
• EN/IEC 61000-6-5, Immunity power station and substation environment
Substation
automation
• IEEE 1613, Testing Requirements for Communications Networking Devices
Installed in Electric Power Substations
• IEC 61850-3, Communication networks and systems for power utility automation –
Part 3: General requirements
Safety
• EN/IEC 61010-1, Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 1: General requirements
• UL 61010-2-201, Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-201: Particular requirements
Table 2. Agency approvals and standards compliance
2.5.2. FCC Part 15.105 Class A Notice
This product has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
when the product is operated in a commercial environment.
This product generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the user manual, may cause harmful interference to radio
communications. Operation of this product in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at the users
own expense.
2.5.3. Simplified Declaration of Conformity
Hereby, Westermo declares that this product is in compliance with applicable EU directives
and UK legislations. The full declaration of conformity and other detailed information is
available at
www.westermo.com/support/product-support
.
Figure 2. The European Conformity and the UK Conformity Assessment markings
RedFox 5728 Series
9
