Westermo 3635-0010, Руководство пользователя

Страница: 14 / 28

3.5. LED Indicators
LED Status Description
ON OFF Product has no power
GREEN All OK, no alarm condition
RED Alarm condition, or until product has started
up. (Alarm conditions are configurable, see
WeOS Management Guide)
BLINK Location indicator ("Here I am!"). Activated
when connected to WeConfig tool, or upon
request from web or/and CLI. RED BLINK
during boot indicates pending cable factory
reset.
RSTP OFF RSTP disabled
GREEN RSTP enabled
BLINK Product selected as RSTP/STP root switch
FRNT OFF FRNT disabled
GREEN FRNT OK
RED FRNT error
BLINK Product configured as FRNT focal point
DC OFF Product has no power
GREEN Power OK on DC1 and DC2
RED Power failure on DC1 or DC2
X1 to X12 OFF No link
GREEN Link established
GREEN
FLASH Data traffic indication
YELLOW Port alarm, or port is set in blocking state by
link redundancy protocol
Table 9. LED indicators
14 Viper 12A Series