WESTENDORF MAX420, Руководство оператора

Страница: 7 / 36

7
Westendorf Manufacturing Co., Inc. WESTENDORFMFG RR315270
MAX Loaders
Transport Loads Safely
Use the proper attachment to lift and carry the load.
Follow the instructions in the appropriate operator’s
manual for any loader attachments.
Carry loads low and slightly rolled back.
Travel SLOW and avoid slopes.
Avoid High Pressure Fluids
Escaping fluid under
pressure can penetrate
the skin causing serious
injury.
Avoid the hazard by re-
lieving pressure before
connecting or discon-
necting hydraulic lines.
Tighten all connections before applying pressure.
Search for leaks with piece of cardboard or wood. Protect
hands and body from high pressure fluids.
If an accident occurs, see a doctor immediately. Any fluid
injected into the skin must be surgically removed within a
few hours or serious infection may result. Doctors unfamiliar
with this type of injury should reference a knowledgeable
medical source.
DO NOT mount a valve with direct mount joystick inside
the tractor cab. Use only a remote cable inside cab.
Check the loader response to the control lever move-
ment. The loader should respond according to the
ASAE standards shown. If response is incorrect,
check the hydraulic hose connections at the trac-
tor and manifold and correct if necessary. 1-Lever
control functions are shown throughout the manual,
refer back to this section for operation regarding the
2-Lever control.
Hydraulic Control Functions
1-LEVER CONTROL 2-LEVER CONTROL
ASAE standard S335.4 shown in above illustrations
Prevent Falling Loads
ALWAYS secure the
load at the source.
Round bales, square
bales, posts, stones,
logs and other objects can fall
or roll from a raised loader or
attachment, which may crush
the operator or bystanders.
Handle all raised loads with
caution. Keep eyes on load
while raising or lowering.
•
DO NOT carry items that may shift in the loader
bucket or attachment.
•
DO NOT handle round or square bales unless the
loader is equipped with the proper bale handling at-
tachment.
•
DO NOT handle bales with the pallet fork attachment.
•
NEVER travel with a raised load.
•
ALWAYS carry loads low and close to the ground.
Raised Loader
A raised loader can fall unexpectedly, resulting in
death or serious injury.
NEVER enter the area
under a raised
loader or
attachments.
Lower bucket or
attachments to the ground, place tractor transmission
in park, shut off engine and remove key before servic-
ing loader or attachments.
Detach loader from tractor to service the tractor.
The loader lift arms and attachments may be con-
trolled by mechanical controls, electrical controls, or a
combination of mechanical/electrical control devices.
Movement of the controls for the lift arms and the
attachments shall be of the NON-DETENTED TYPE,
except for the float position control, which may be held
in position by a detent. This does not apply to purpose
design automated functions e.g. return to dig.
ASABE standard S583 4.6.1
SECTION 2: SAFETY