WESTELL.COM
Page 10
Remote RMM-700 Installation Guide
Installation
1-800-377-8766
Installation
Step 1: Install SIM Chip and Wireless Phone Module Hardware in
Remote RMM-700
CAUTION:
Kentrox equipment and peripherals contain electrostatic sensitive
components. Proper handling precautions must be exercised.
If your Remote RMM-700 includes the wireless phone module, follow these steps to
install the necessary hardware:
Note:
Installation of a SIM Chip and/or wireless phone module is not necessary in all
applications. If your Remote RMM-700 comes with the phone module and SIM
chip installed, proceed to Step 2: Install Mounting Flanges.
1. Affix the FCC sticker (included with the phone module) to the product label on
Remote RMM-700.
2. Using a screwdriver, remove the top/back cover from Remote RMM-700 by
removing the screws from both sides of the top and the center of the back of the
unit. (See Figure 1-1 on page 10). Slide the top cover back and remove it from the
unit.
Figure 1-1
The installer removes the screw from the back side of Remote RMM-700.
Screws
