PS71090
E
Product Manual
October 2019, Rev A
WESTELL.COM
©2019 Westell
Technologies
September 2019;
Doc No. CS14702802UM
rD
1.877.844.4274
Page 40 of 61
Figure 6.1: Network Connection Set-up
1)
Select Use the following IP Address and enter the IP address 192.168.1.x, where
‘
x
’
is any
number from 2 to 254, inclusive, other than 150.
e.g. Set Computer IP to 192.168.1.2
2)
Ensure that the subnet mask is set to 255.255.255.0.
NOTE
Refer questions about these settings to your IT department.
3) Navigate to the Westell PS71090E directory- on the included USB drive and
Unzip the 096001911-
XX Westell PS71090E GUI Install vX.X.zip file content
4) Locate Setup application software file and double-click to install, as seen below.
Figure 6.2: Destination Directory
